Mother-in-Tongue Law and snake plant are common names for the Sansevieria Fernwood. It belongs to the genus Sansevieria and is a tough, evergreen succulent.
Specifically, this Snake Plant is a cross between the Sansevieria parva and the Sansevieria suffruticosa. Sansevieria plants and hybrids come in a wide variety.
The natural range of the Sansevieria Fernwood includes Southern Asia, Madagascar, and Africa. Its leaves are shaped like cylinders and come in a rainbow of colors, including bright and dark green, yellow, and even white.
These leaves originate from a single point on the plant body and develop upwards to a sharp tip.
This plant contains a small amount of a mildly poisonous substance; therefore, it should be kept out of reach of dogs and children.
About Fernwood Snake Plant
Table of Contents
Size and Expansion of Fernwood Snake Plant
The slow-growing Sansevieria Fernwood, with its characteristic cylindrical leaves, blooms and grows nearly entirely in the spring and summer.
Therefore, at most, it could take them a few years to reach their full height. However, if you use artificial light, you can hasten the plant’s development.
Depending on how well you take care of your Fernwood, it can grow to be anywhere from 2 to 6 feet tall.
Flowers and Scent of Sansevieria Fernwood
Once a year, during the summer, Sansevieria Fernwood puts on a show of beautiful flowers. You must think you’re witnessing something quite special, but it won’t last forever.
In most cases, the blossoms of a snake plant will be small and white, and they will bloom atop a sharp stem.
The Foliage of Sansevieria Fernwood
The foliage of this shrub is thick and evergreen. The thin green leaves easily identify Sansevierias with distinctive pale greenish horizontal streaks. Each leaf may look cylindrical, but it actually contains a groove running vertically from its bottom to its top. Lots of drooping leaves create a fountain-like form.
Size of Sansevieria Fernwood
There is a potential for Sansevieria Fernwood Mikado to reach a height of 3 feet.
Flowering Sansevieria Fernwood Plants
The Sansevieria Fernwood mikado can occasionally produce flowers. This occurrence occurs once a year. The clusters of tiny, white blooms may be atop a long flower stalk that grows from the ground up.
Fernwood Snake Plant Care
Light Requirements for Sansevieria Fernwood
The light requirements of this hardy little plant are so low that it may thrive almost anywhere. Sansevieria ferns can adapt to varying light levels, from direct sunlight to complete darkness.
However, if possible, you should keep it out of the direct sunshine. Bright, indirect sunshine is the best lighting option for a Snake Plant if you have one. You can also use artificial light for this plant.
Water Requirements for Sansevieria Fernwood
These plants are great for the environment. The basic technique for watering the plant is to do so whenever the soil becomes dry. The plant has to be watered once each week during the summer. On days when it’s cooler, less water is needed. The plant must only be watered every two weeks during the fall and winter.
The soil and plants are extremely delicate and will rot if overwatered. A few extra sips of water would be like poison to the plants. The dark green leaves of the parent plant could endure this torture; however, the baby snake plant could die from root rot if you let water pool at the base of the plant. As a result, preventing excessive watering is a crucial element of Sansevieria Fernwood Care.
The Sansevieria Fernwood, like other succulents, retains water in its leaves. Allow the soil to dry out in between waterings to avoid causing any problems related to overwatering.
Excess water should be allowed to drain from the bottom of the pot after watering. In case of uncertainty, wait to water. When deciding between underwatering and overwatering, choose underwatering. Watering thoroughly should remedy the situation where insufficient water has caused the leaves to become dry and withered.
Overwatering manifests itself in yellowing leaves that are also soft and mushy. Root rot is a common consequence of overwatering. If the roots decay, the plant won’t get any water since it can’t absorb it.
Root rot, alas, cannot be treated successfully. However, any viable components can be saved by being replicated.
Use a watering can with a long spout to avoid soaking the clusters of leaves at their tops.
Soil Requirements for Sansevieria Fernwood
These hardy plants thrive in a wide range of soil conditions. However, you should select a soil mixture that drains properly. Since snake plants like being dry, you may use a cactus combination. If you can’t find a cactus mix, you can make regular potting soil more suitable for cacti by adding sand and pebbles to it. Soil pH should be between 6.0 and 7.9 for optimal plant growth.
Don’t grow these plants in too heavy or soggy soils. Roots can become black and rot if the water sits at them for too long. When the roots are harmed, the plant has almost no chance of survival. Therefore, you must select looser and sandier soils for your Fernwood Snake Plants to flourish.
Temperature Requirements for Sansevieria Fernwood
It is best to keep the Fernwood Mikado snake indoors, where it can bask in a nice, warming environment. If you want to keep these plants happy, you may need to crank up the heat to between 70 degrees Fahrenheit. It’s not ideal for growth, but they can survive down to about 60 degrees Fahrenheit.
The snake plant has difficulty surviving in temperatures below 60 degrees since it is sensitive to wind and frost.
Fertilizer Requirements for Sansevieria Fernwood Mikado
The Fernwood Snake Plant may now make do with nutrient-depleted soils. As a result, you can save money on fertilizer because this plant thrives even without it.
The snake plant’s growing season begins in spring and continues through the summer; at this time, you can give it cactus fertilizer to help it thrive. No fertilizer is needed during the winter when the plant is dormant.
Growth of Fernwood Plant
Growing a Snake Plant to its full height might take months or even years. That’s because it grows mostly in the warmer months of spring and summer and stops then.
The height of a Sansevieria Fernwood tree can be anything from 2 to 6 feet. This plant’s growth rate can be accelerated by maintaining a favorable environment for it. Putting a Snake Plant in a spot with moderate light, whether natural or artificial, will encourage faster development.
This plant can thrive either in its natural environment or indoors. The only possible difference in the plant is the size it may grow to after receiving the same care and growing operations. If you give a plant more room to grow, it will grow bigger.
Potting Fernwood Plant
A heavier container is preferable for planting a Sansevieria Fernwood. Due to their top-heavy nature, terracotta or other clay pots with draining holes are recommended. If the water has collected in the saucer underneath the pot, drain it.
Choose a large, deep pot if you want your Snake Plant to reach a certain size or a smaller, shallow pot if you want it to stay a manageable size. The Sanverieria Fernwood plant can be successfully grown in various containers, including pots, flowerpots, planters, containers, and baskets.
Pruning Fernwood Mikado Snake
If you want your snake plant to stay neat and bushy, you’ll need to prune it often. As a result, the soil below the potting mix will dry up more rapidly, and there won’t be any root rot.
A healthy Sansevieria Fernwood will have thick, green leaves with no browning at the leaf tips or edges.
Use shears or a sharp knife to make clean cuts without damaging the Sansevieria Fernwood’s delicate leaves during pruning.
If you accidentally get water on any portion of the stem, your plant could decay if you cut too deeply into the root.
Propagate Sansevieria Fernwood
The snake plant is a lovely succulent adaptable to different conditions. These plants can be easily propagated with a little time and effort.
Here are some suggestions for growing your own Sansevieria Fernwood:
Snip off pieces of the stem from mature, healthy plants.
Use a fully formed adult leaf cutting.
Put the leaf-cutting into a pot with good soil for propagation. Split your perlite and succulent growing mix in half for the greatest results.
Keep the soil damp but not wet.
Set your container where it will receive at least a half day of direct sunlight once a week. There should be new growth after two weeks; after six to eight months, the plant should have taken root.
Keep the cutting reasonably moist until roots have formed, and then transplant into a container with well-draining soil.
Common Sansevieria Fernwood Pests and Illnesses
Under or overwatering might cause the leaves to become yellow. Overwatering is more likely than underwatering; therefore, it’s essential to keep an eye on your snake plant to ensure it doesn’t get too much water. Root rot and fungal diseases can be caused by too much water. The leaves’ drooping and softness are further indicators of this. Root rot is exacerbated by the cold, so timing your watering accordingly is essential.
Lack of moisture causes the leaf tips to curl dryly. Therefore, you must remove the drainage saucer from the bathtub and give the plant a good soak.
Flaky, charred areas are signs of sunburn or uneven exposure to the sun.
Insects and other pests rarely bother snake plants. But if it’s warmer and drier than usual, pests like spider mites, mealybugs, and thrips may attack. In most cases, you can get rid of the insects by washing them away with pesticidal soap or wiping them with rubbing alcohol. Neem oil, which can be sprinkled around, is another option for controlling pests.
Overwatering causes many issues, including leaf spots and blight. In this situation, you should repot the plant and treat it with a fungicide. Long-term Snake plant survival relies on a consistent, moderate watering schedule.
Concluding Sansevieria Fernwood Care
The Fernwood Sansevieria plant originated in the tropical regions of present-day West Africa. The species as a whole has a great number of variegated cultivars, giving you a wide range of options for color and decoration to work with.
This plant has unique structural characteristics. Its pointed form makes it a common fixture in feng shui settings, where the upward-pointing leaves are thought to counteract any negative energy.
In terms of purifying the air, a Snake plant is second to none. Having it contained in one area is good for the family as a whole. However, you must exercise caution because the plant is toxic.