One of the best houseplants for novice gardeners to start with is satin pothos. They are effortless to maintain, as well as incredibly simple to multiply like another pothos plant.
Scindapsus pictus are trailing plants with a distinctively variegated appearance that are lovely and simple to cultivate. Scindapsus pictus argyraeus is the scientific name for this plant.
However, it is more commonly referred to by its name, Scindapsus pictus. The plant is also known as Silver Pothos, Satin Pothos, Silver Satin Pothos, and Silver Vine which you can grow in the spring and summer.
Satin Pothos Propagation Process
Table of Contents
One of the things that people love most about satin pothos is how simple it is to propagate pothos.
It’s possible that you neglected to be a good plant parent while you were away on vacation or because you were too occupied with other things. On the other hand, the charming satin pothos is quick to forgive and forget.
Just ensure you are careful with the satin pothos care because you don’t want to end up with a root rot.
Pruning of the Satin Pothos
Pruning is an essential component of their care, closely followed by propagation. This provides an overview of the propagation of Satin Pothos, covering topics such as pruning, propagating, caring for cuttings, planting, and other pertinent information.
Who wouldn’t fall head over heels in love with the dark green leaves with silver philodendron splashes? It’s gorgeous!
What to look out for During the Satin Pothos Cuttings
Even though going through the motions is a breeze, there are a few methods to propagate pothos. Here is the basic rundown:
Taking Cuttings in Water to Root Them
Planting Cuttings in the Ground to Take Root Layering
Let’s get started by putting on some protective gear, like gloves, scissors, and potting soil.
The Right Method of Satin Pothos Propagation Process
It is helpful to understand how the various ways of propagation operate to have a better hold on selecting the one that will work best to fulfill your requirements.
Water and Soil Propagation Method for Satin Pothos
One strategy for the propagation of satin pothos plants is to root cuttings in water or soil and grow healthy new roots.
The roots that emerge from satin pothos started in water are less well-adapted to life in the soil, it takes plants that were started in the water a little bit longer to become established in their new surroundings.
Satin Pothos Propagation in Soil
Plants planted in soil take a little bit slower to become entrenched, but once the roots grow, the satin pothos plant will begin to grow relatively quickly since the roots are more adapted to the conditions in the soil.
Satin Pothos Propagation in Water
The new roots grow in water as their structure is different each time. Roots started in water have thinner root hairs, and the roots themselves are more compact.
Once they have been moved to the potting mix, they have an increased risk of root rot.
In no way does this imply that you shouldn’t utilize the water method at all; nonetheless, you should be aware that if you go with this approach, it will take some time for your satin pothos plant’s roots to become more resilient before it can begin to thrive.
The water method is the one that most people use, even though it is common knowledge that the roots will be less strong.
Satin Pothos Cuttings: Root Division Method
On the contrary, root division is the technique to use when you need to cut satin pothos because it has outgrown its container or when you have a giant plant that can be readily segmented into multiple plants.
The benefit of satin pothos cutting roots is that it expedites the process by which newly created plants can become established and begin growing in their new locations under enough light (not too much direct sunlight).
Layering Method for Satin Pothos Plant
Layering is another option that you have, and it works best with plants that have long tendrils. Unlike some others, it only requires you to cut the vine after it has already begun to form roots. This gives you the peace of mind that your new plant will be successful.
During the layering process, a section of the vine is buried while it is still linked to the parent plant. When the vine reaches the node, it will establish roots there; once it does, you can cut off the piece with roots and plant it in its container.
Things to Look Out for When You Propagate Satin Pothos!
First, satin pothos plants have calcium oxalate in them, which can cause skin irritation if it meets it.
It is important to remember that no portion of the plant should ever be consumed, nor should the juice be brought anywhere near the mouth or the eyes.
If you intend to use these suggestions to help the children with an indoor project, you must ensure they are properly supervised.
Protecting your skin is another essential step before interacting with satin pothos. That requires you to put on gloves and a shirt with long sleeves. While working, you should remember that you shouldn’t touch your face.
Keep Your Tools Ready for Satin Pothos Cuttings!
Make sure you have all your tools organized and ready to go before you begin working. An excellent place to begin is with a container loaded with water or potting soil.
The freshly propagated satin pothos cuttings should be separated from its parent and transplanted to its new environment as soon as possible for the best chance of success.
It would be best to constantly sanitize your container by wiping it down with 10 percent bleach and 90 percent water. This will remove any potential germs that could infect the plant and cause it to become ill in the future.
Precautionary Measures for Satin Pothos Cuttings
In addition, you should use a new potting substrate; do not use anything from the garden or dirt that has been used before.
Cleaning your instruments with the same bleach solution won’t affect anything, so feel free to do so. It is preferable to be safe than sorry.
You can either plant your pruning immediately into the pot you hope to nurture your satin pothos plant buddy in or use a temporary or smaller container if you prefer. Simply put, it should have the capacity to store around eight ounces of dirt.
To make a new satin pothos plant from a cutting, all that is required is a small piece of the stem and part of the leaves, which are then placed in a container filled with water to encourage root formation.
Process of Propagation Via Satin Pothos Cutting
One important thing to keep in check is that when you pluck a cutting, you need to pick a piece that comprises a node; otherwise, the cutting won’t establish roots.
The points on the satin pothos plant, known as nodes, are the locations from which the leaves extend outward from the main stem.
This region has a higher level of cellular activity than the regions known as internodes and is located between the nodes.
Satin pothos plant has plenty of nodes, as they not only have leaf nodes but also have nodes on their aerial roots, so you don’t need to be concerned about it.
These are black, dense nubs that have the potential to become roots; however, this does not always happen. You’ll be in excellent condition if you include at least one of these, so make sure you do.
Remove a section of the stem that is six inches long and has at least one leaf and at least one node. Insert the cutting into the water at room temperature, then position the glass where it will receive bright indirect light.
Keep a Closer Look when Propagating Satin Pothos Plants!
Every couple of times, you should replace the water and keep a watchful eye out for any symptoms of mold developing in the glass. If you find any, wash the glass and start fresh with new water.
Little roots will start to emerge from the base of the plant at some point in the future. When the roots on your freshly rooted pothos reach a length of approximately one inch, it is time to move them into some potting mix.
Don’t put it off forever. It will take a plant longer to become acclimated to life in the soil the longer its roots are allowed to develop in water.
Prepare potting dirt and a pot for transplanting. Ensure that there is at least one drainage hole in the container.
Create a shallow hole and insert the cutting into it. About half an inch of dirt should cover the crown or the junction of the stem and the roots. Stabilize the plant by pressing firmly on the dirt around its stem and roots.
Growing from cuttings in water and soil is very similar. Using a similar-sized blade, cut off a section of the satin pothos plant, ensuring it contains at least one node and one leaf.
Growing a Healthy Plant from Propagating Satin Pothos Plants
Dip the rooting hormone powder onto the cut end before being placed in a container of a potting substrate. Start by sticking a pencil into the ground to make a hole for a few cuttings.
An excellent rooting hormone powder is a must if you intend to conduct a lot of propagation. A greater number of roots form at the outset, and the rate at which they grow is accelerated.
Satin pothos cutting doesn’t require any assistance, but if you’re eager to see the results of your hard work, a little rooting hormone might help speed up the process.
After ensuring that the cutting is firmly embedded in the soil, add a little water. When the roots develop, the soil should be moist but not soaked. Put the container in a spot where it will receive bright indirect light.
Your Satin Pothos Plant will Grow in a Few Weeks!
In a matter of weeks, the plant will develop roots. Simply giving the cutting a light pull will allow you to determine whether this has occurred.
It is rooted if it puts up a fight. After that, you can move it into a container that will be its home for the foreseeable future.
Pothos can be readily multiplied through layering, which may have already been carried out without your knowledge at some point in the past.
When a portion of a vine that has a node encounters the ground, roots have the potential to develop there and frequently do.
To do this in the simplest way possible, fill a second vessel with potting mix and cut a long vine from the parent plant to place in the new container.
In the second container, drape it over the top of the dirt to cover the entire surface. The vine should still be linked to the parent plant after you bury one of the nodes in the ground.
Add water at this point. Maintain a moist soil environment and wait for the formation of roots, which should take no more than a few weeks.
You can carefully remove the plant from the potting substrate to check whether the roots have developed. In such a case, you will need to bury it once more and continue to wait.
Propagate Satin Pothos: Layering Your Plant!
You can perform compound layering, which entails repeatedly burying the same section of the vine in the ground to produce multiple rooted cuttings from a single vine that are ready to be transplanted. If you do this, you can grow new vines from the stem cuttings successfully.
After the layered portion of the plant has developed roots at least one inch long, it is ready to be transplanted. It is not necessary to be so precise as to dig up the plant to examine the length of the roots; instead, you may give the buried area a light pull. If it fights back, you know it’s ready.
Using a pair of clean shears or secateurs, cut the stem on the side of the plant relatively close to the parent plant. Snip at a leaf node. You are finished if you have already planted the number of roots in a separate container.
Deal with the new part in the same manner that you would with any young transplant.
Take a tiny hand shovel and dig up the young plant if you are removing a piece of the plant that has become embedded in the same container as the parent plant.
Leave a few inches of border around the established section’s entire perimeter, then plant this in a larger pot with clean potting mix.
A Grown Plant from Propagation
Plants of the genus pothos can bear blooms and, later, seeds. Isn’t it fantastic news? Imagine creating a pothos-filled rainforest for the cost of a single seed packet.
Flowering isn’t Promised in Satin Pothos Plant!
Only fully grown pothos plants may produce flowers, which are often only those flourishing in their natural environments. On top of that, this species is known to have “shy blossoming,” which means there haven’t been any verifiable reports of it flowering since 1962, not even in its natural habitat.
That indicates that the seeds you might come across out there that are up for purchase are most likely of poor quality.
It’s unlikely that these seeds are the proper species, and even if they are, there’s no telling how old they are or if they harbor disease viruses that would kill your seedlings if you planted them.
Since seeds are out of the question, it’s good that this plant is so simple to multiply in any of the ways above.
The Process of Propagating Satin Pothos Plant Is Painless
It doesn’t matter if you’ve been growing plants from seed for years or are just starting; a few cuttings of the pothos will make you look like a pro. Without effort, a single plant can cover an entire room in lush greenery.
Precautions of Growing a Satin Pothos Plant
The satin pothos plant makes great indoor plants. Whether you choose to grow them in spring and summer, or fall and winter, there are a few things you need to care for.
Satin pothos requires indirect light to grow. During your satin pothos care, make sure you are watering it adequately so you don’t end up with a plant with root rot.
Lastly, is satin pothos toxic? Unfortunately, if ingested by your cat or dog, the plant might be incredibly dangerous for them!
Satin pothos care is a must before, during and after propagation. Propagating Satin pothos plant is a breeze whether in water or potting mix, the roots grow and you get a completely new plant.
Propagating your Satin pothos is relatively foolproof so long as you trim the cutting in the appropriate location (remember the node!), add some liquid fertilizer to the water, and then watch the water to ensure it remains fresh.
Like taking care of your pothos, propagating it is simple, and you may feel good about your efforts whether you decide to retain the new growth or give it away to a friend.